A property manager renovating a medical suite off Harvester Road gets a note from the building inspector: the main entrance and the public washroom both need power door operators to pass the barrier-free review. The fit-out is otherwise done. Now there is a door that opens by hand where the code says it has to open at the push of a button. That is the call we take most often on the commercial side.
Treco Locksmith & Security supplies, installs, repairs, and services automatic door operators across Burlington, Hamilton, Oakville, and the wider Halton region. We have been mobile-only since 2018, so we bring the equipment and the work to your building, no storefront, no waiting for a counter to open. An automatic door opener is part security hardware, part accessibility equipment, and we handle both sides of it, including the low-voltage wiring that ties the actuator to the operator.
Low-Energy Swing and Pivot Operators
An automatic door operator is the powered unit mounted at the head of a door that opens it for the user and then closes it under control. We work with low-energy swing and pivot operators, the type fitted to a standard hinged commercial door, as well as washroom and bathroom door operators. We do not install or service automatic sliding doors; if you are not sure which kind you have, tell us the make and model and we will confirm it is our type of work before scheduling.
“Low-energy” is a specific category, not marketing language. These operators open the door slowly and gently, under controlled force, which makes them inherently safe around pedestrians approaching from close range. That is exactly what you want on an office entrance, a clinic door, or a washroom where someone is right at the threshold when the door swings. The governing standard is ANSI/BHMA A156.19, which sets the opening and closing speeds, force limits, and time delays for low-energy power operators. We set up and adjust every operator to operate within those parameters.
Push-Plate, Wave-to-Open, and Accessibility Buttons
The operator is only half the system; the other half is how it gets triggered. We supply and install the full range of actuators:
- Push-plate buttons, the round or square “press to open” plates, often carrying the wheelchair symbol, mounted at the approach and exit sides
- Wave-to-open sensors, a touchless actuator where the user passes a hand near the plate, common in clinics and anywhere hand-contact is a hygiene concern
- Handicap and accessibility buttons, mounted at code-compliant heights so a person using a wheelchair or mobility aid can reach them from a seated approach
We mount the actuators, run the low-voltage wiring that links them to the operator, and set the hold-open timing so the door stays open long enough for an unhurried crossing. A push button door opener is only compliant if it is reachable and the timing is right, and that is the part of the job a generic handyman tends to miss.
Supply, Install, Repair, and Service, All Makes
We handle the full lifecycle of an automatic door opener:
- Supply and install a new operator and actuators on an existing or new door
- Repair a unit that has stopped opening, is opening too fast or too slow, or has a failed motor, control board, or sensor
- Service and safety-inspect operators on a scheduled basis to keep them within spec
We install and service operators from the major manufacturers, dormakaba, Record and Keane Monroe, Stanley and Besam, Camden, BEA, and Norton Rixson, and we service all makes, not only the brands we sell. If a previous tenant or contractor left you an orphaned operator, we can usually maintain or repair it rather than rip it out.
Operators are mechanical and electronic devices running thousands of cycles, and the safety standards call for periodic inspection and adjustment. Speeds drift, sensors and actuators wear, and force settings fall out of spec. A scheduled check keeps the door compliant and catches a failing component before it strands your entrance open or jammed shut.
The Accessibility Driver: Why Buildings Need Operators
Most of these jobs trace back to one thing: accessibility requirements. Ontario’s Building Code, Section 3.8 (Barrier-Free Design), requires accessible entrances and many public washrooms in commercial and public buildings to be operable without tight grasping, pinching, or significant force. A power door operator with a push-button or wave actuator is the standard way to satisfy that. ANSI/BHMA A156.19 then governs the safety of the low-energy operator itself.
The need usually surfaces during a renovation, a change of use, a new-tenant fit-out, or an accessibility review. The buyers are predictable: property managers, medical and dental clinics, retail stores, office tenants, and municipalities. Washroom door operators in particular pair directly with broader AODA accessibility upgrades, which is where we look at the whole building rather than a single door.
Who We Serve and Where
We install and service automatic door operators for businesses and institutions throughout the region. In Burlington, that means the QEW business parks, the flex units off Harvester Road, and the office and industrial strip along North Service Road. In Hamilton, it ranges from the King and Main Street office market to retail and clinic space along Barton Street and the commercial fringe of the Bayfront Industrial Area. We also cover Oakville, Stoney Creek, Milton, Grimsby, Brantford, Caledonia, and the rest of Halton.
This work sits alongside our broader commercial locksmith services, master keying, access control, and exit hardware, and our commercial door repair work, since an operator is only as good as the door, frame, and hinges carrying it. When all three come up at once, we handle them on one visit rather than coordinating three trades.
We have held a 5.0 rating across 204 Google reviews since going mobile in 2018. That holds because we set every operator up to standard and we show up when we say we will.
If you have a barrier-free deadline, a washroom that needs a push-button opener, or an automatic door that has stopped behaving, call Treco at (905) 977-8476 for an honest on-site assessment, or contact us online and we will get back to you promptly.